1.Aplikaj Materialoj:
Fibra Lasero-Tranĉanta Ekipaĵo taŭgas por metala tranĉado kun Neoksidebla ŝtala folio, Milda ŝtala plato, karbona ŝtala folio, alojo ŝtala plato, printempa ŝtala folio, fera plato, galvanizita fero, galvanigita folio, aluminia plato, kupra folio, latuna folio, bronza plato, ora plato, Arĝenta Plato, Titana Plato, Metala Folio, Metala Plato, Tuboj kaj Tuboj, ktp
Machine parameters for laser generator:
Item | Parametroj |
Laser type | Fibra lasero |
Potenco | 500W/1000W/1500W/2000W/3000W/4000W/6000W/8000W/12000W |
Wave length | 1070-1080nm |
Electro-optical conversion efficiency | 25-30% |
XYZ Route | 3025mm/1525mm/100mm |
Material Cutting thickness | 0,2-8mm |
Cutting seam width | 0.1-0.2mm |
Ripetu pozicion precizeco | ±0.05mm/500mm |
Pozicia precizeco | ±0.05mm/500mm |
Maksimuma Rapido | 60000mm/min |
Max.Accerlation speed | 25m / min |
Max.loading weight | 500kg |
Maŝina pezo | 2300kg |
Required Power | 220V 50Hz/60Hz |
Machine size(L*W*H) | 4500mm*2450mm*1700mm |
Configuration of fiber laser cutter:
Priskribo | Qty | Original | Brand | |
1 | Fiber laser source (500W/800W) | 1SET | China | MAX |
2 | Laser cutting head | 1PC | Switzerland | RAYTOOLS |
3 | Machine bed and accessories | 1SET | China | |
4 | Electric control | 1SET | OMRON,Schneider | |
5 | Gas circuit control | 1SET | Japan | SMC |
6 | Precise Rack | Each 3SETS | China | |
7 | Precise linear guide rail | Each 3SETS | Taiwan | PMI |
8 | Planetary Gear | 3SET | China | |
9 | Machine bed accessories | 1SET | China | |
10 | Digital cutting system | 1SET | USA | AHEADCUT |
11 | Industrial control computer | 1SET | China | AHEADCUT |
12 | Communication servo and driver | 4SETS | China | |
13 | Cooling Unit | 1SET | China | |
14 | Waste recycling equipment | 1SET | China |
Equipment work and environmental requirements
Requirement | |
1 | Power supply: regulated stable power supply: (recommended) (1)rated output voltage: 220 v (2) voltage frequency: 50 hz (3) the stability of the two phase voltage + 5% (4) the output voltage adjustment rate: < 2% |
2 | Cutting with auxiliary gas: Clean, dry compressed air and high purity oxygen (O2) and nitrogen (N2) ,purity no less than 99.9% purity |
3 | Cutting material Sheet material is even, smooth;Clean the surface |
4 | The compressed air supply device (1) the rated pressure: 14 bar (2)Capacityt: 1 m3 |
Theory Cutting parameter
Power(W) | Materialo | Dikeco (mm) | Cutting speed(m/min) | Gas |
800 | Senrusta ŝtalo | 1 | 8-9 | N2 |
2 | 5-6 | N2 | ||
3 | 1.8-2 | N2 | ||
4 | 1.2-1.3 | N2 | ||
800 | Carbon steel | 1 | 8-10 | O2 |
2 | 4-5 | O2 | ||
3 | 2.8-3 | O2 | ||
4 | 1.4-1.8 | O2 | ||
5 | 1.2-1.5 | O2 | ||
6 | 0.9-1.1 | O2 | ||
8 | 0.6-0.7 | O2 |
Power(W) | Materialo | Dikeco (mm) | Cutting speed(m/min) | Gas |
500 | Senrusta ŝtalo | 1 | 6-8 | N2 |
2 | 2-2.2 | N2 | ||
3 | 0.6-0.8 | N2 | ||
500 | Carbon steel | 1 | 7-8 | O2 |
2 | 3.5-4 | O2 | ||
3 | 2.8-3.2 | O2 | ||
4 | 1.3-1.5 | O2 | ||
5 | 0.9-1.1 | O2 | ||
6 | 0.6-0.7 | O2 |